Via MMDVM

 

SERVERNAME: hotspot.oz-dmr.uk (IPv4 & IPv6 enabled)

PORT: 62031

PASSWORD: passw0rd

 

Set your OPTIONS based on your talk group requirements. Or use our OPTIONS CALCULATOR

 

Options=TS1=2350;TS2=2350;DIAL=0;TIMER=15;VOICE=0;SINGLE=0;LANG=0;

 

 

TS1=2350,235;

Set Statics you want on Slot 1.  Check the list of Talk Groups available to choose which TG’s are set as static.

Separate each Talk Group with a comma.

TS2=2350,2351;

Set Statics you want on Slot 2.  Check the list of Talk Groups available to choose which TG’s are set as static.

Separate each Talk Group with a comma.

DIAL=2350;

0=None. Only One Talk Group can be entered in this section. You should not have the same Talk Group set as static on Slot 1 or Slot 2.

TIMER=15;

Time a Talk Group is held active for.  Pressing your PTT on a Talk Group reset this timer.  You select any number of minutes you like here.  But the recommended time is 10 or 15 mins.
If setting more than one static to a slot, you might wish to set Timer to 0 or 1 min.

VOICE=0;

0=OFF  1=ON.  15 minute Voice Ident can be set ON or OFF on Time Slot 2 only.

SINGLE=0;

Turn off Single Mode. Network default is ON=0. OFF=1.

LANG=0

Set the Language the VOICE comes back to you as.  0=Servers Default.

Examples:-     LANG=en_GB_2     LANG=de_DE     LANG=it_IT
VOICECODE
English 1en_GB
English 2en_GB_2
English 3en_US
Spanish 1es_ES
Spanish 2es_ES_2
Frenchfr_FR
Germande_DE
Danishdk_DK
Italianit_IT
Norwegianno_NO
Polishpl_PL
Swedishse_SE

Each section needs to be separated with a Semicolon.

Does not matter what order the above codes are in.